News

HUCK bolts offer superior strength compared to conventional bolts in several key ways: Tensile Strength: Tests have shown that HUCK bolts can deliver 10-20% higher tensile strength than their threaded counterparts. This makes them ideal for applications requiring exceptional holding power.

Normally a common blind rivet is comprised of two parts: a hat, the part that deforms and stays in the installation; a mandrel, the part that is pulled into the rivet. It’s worth mentioning that in case of the common blind rivet, the mandrel mighe move.Compared with the common type , the structural blind rivet is designed with a locking mechanism to hold the mandrel in place.

trifold rivets are a style of blind rivets that are specially designed for structural and other high-strength applications. Also called Tribex® rivets, these tri fold rivets feature a slotted sheath; when installed, the sheath splits to create three “wings” that provide a large bearing surface.

The self-clinching fastener is placed in the prescribed hole in the mating panel and when the fastener is pressed into the sheet it becomes an integral part of the chassis. This process eliminates loose hardware, which is especially important in electronic applications.

Why would you use a wedge anchor?A wedge anchor is a mechanical type expansion anchor that consists of four parts: the threaded anchor body, the expansion clip, a nut, and a washer. It is designed for use in solid concrete only. These anchors provide the highest and most consistent holding values of any mechanical type expansion anchor.

Because of the differences in composition, 400-series stainless steels can be heat treated to higher hardnesses while 300-series stainless steels cannot. This enables 410 stainless steel fasteners to be much harder than any 304 stainless fastener, and thus stronger.

Castle Nuts are generally manufactured in Steel or Stainless Steel, with other materials also available. They are available in a range of sizes, with thin versions also available. Castle nuts are nuts that look like crowns or parapets of mid evil castles. These nuts are used together with a bolt and a cotter pin to create a secure nut in place so that it cannot be tightened or loosened. A castle nut might not be able to be installed to the correct position due to the cotter pin alignment with the slots. Installed to an improper torque value, a castle nut is subject to loosen. A lock nut relies on friction alone. In an oily environment, that would be compromised. A castle nut and cotter pin are a mechanical lock. In my opinion, that is more reliable.

The eye bolt (otherwise known as a lifting eye bolt or eyelet) is a type of bolt with a loop at one end. They are used for a wide variety of material lifting applications and may either pivot or swivel. The securing eye must be securely attached to the structure before ropes or cables are tied for lifting.Disadvantages. Eye bolts are stationary lifting points, making them suitable only for straight-up, vertical, and in-line lifts. Eye bolts offer a relatively lower rated load capacity, which is 65000 lbs.

A concrete anchor is a device that is used to secure objects to concrete surfaces. It is typically made of metal and is inserted into a drilled hole in the concrete. The anchor is then expanded or tightened to hold the object in place.Concrete anchors are used in a variety of applications, including construction, engineering, and home improvement projects.They are commonly used to secure fixtures such as shelves, cabinets, and heavy machinery. Concrete anchors come in different types, including wedge anchors, sleeve anchors, and drop-in anchors, and the type of anchor used depends on the weight and type of object being secured, as well as the thickness of the concrete.Concrete anchors are designed to be strong and durable, making them an ideal solution for securing heavy objects to concrete surfaces. They are easy to install and can be done by anyone with basic DIY skills and tools.

Lock nuts exist to keep two parts from loosening due to vibration or other external forces. This type of nut is used when extra security is needed, such as in applications that require high levels of torque or ones that will be exposed to extreme temperatures or vibrations. You might also see them used when attaching bolts or screws to something like an engine block or transmission housing, where vibration can loosen the connection over time.Lock nuts have threads on both sides, so they can be tightened using two wrenches for added stability and security. The internal threads are slightly larger than the external ones, allowing them to stay in place more easily by gripping onto their mating piece more tightly than traditional single-sided nuts. Some types of lock nuts also have special features like serrated flanges that grip onto the surface they are attached to, further preventing them from loosening over time due to vibration or other external forces.

A lock nut, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut,stiff nut or elastic stop nut,is a nut that resists loosening under vibrations and torque. Prevailing torque nuts have some portion of the nut that deforms elastically to provide a locking action. Free-spinning lock nuts exist which carry the advantage of not requiring extra torque until seated.

Hex nuts are made from a number of materials, from steel, stainless steel to nylon. They can fasten a bolt or screw securely through a threaded hole, the threads tend to be right-handed. With six sides it makes it easier to work with, tools such as a spanner, or a ratchet make it very versatile to tighten or loosen. They are higher profile than other types of fasteners. Also, the tools used to tighten them generally take up more room. They require either a wrench (needs a significant amount of space), or a socket (still can be tricky to fit in tight spaces).